Traditionally it has been very difficult and time consuming to level glass on frameless systems. With our all-new easy adjust dry glaze system this is a problem of the past.
Our unique sliding wedge assembly allows full adjustment of the glass and the entire installation can take place from the inside face/ balcony side where it is easiest and safest for the installer.
Install in just 5 easy steps:
Step 1 – Your first step is to place the wedge assembly into the channel followed by the back gasket.
Step 2 – Carefully lower the glass into the carrier followed by the locking wedge.
Please note: it is very important not to apply any downward pressure on the wedge at this stage.
Step 3 – Using the easy adjust tool, simply slide the carrier left to right for up to 20mm adjustment each way.
Step 4 – Once the glass is plumb and perfectly aligned with adjacent panels, use the combi tool to lock the front wedge into place.
Step 5 – The front gasket can now be fitted using the roller incorporated in the combi tool.
Never before has it been so easy – and safe – to install frameless glass balustrade systems.